EQUIPMENTS

Through the Portuguese Recovery and Resilience Plan (PRR), VICARTE has strengthened its scientific and technological equipment for research on glass and ceramics in science, art and cultural heritage. The investment covers both VICARTE institutions, NOVA School of Science and Technology (NOVA FCT) and the Faculty of Fine Arts of the University of Lisbon (FBAUL), and was funded by two FCT calls under investment RE-C05-i13 – Scientific Research Units.

At NOVA FCT, the new equipment renews electron microscopy and microanalysis, adds 3D digital microscopy, optical spectroscopy and high-temperature thermal analysis, and completes a glass and ceramics workshop. At FBAUL, it brings robotic fabrication to ceramics, a disc mill for recycling glass and three new kilns. The equipment is shared by researchers from both institutions and is also accessible to external users from academia, industry, museums and other organisations, by appointment. .

VICARTE Coordination

Funding

 PRR1 – Research UnitsEQUIPAR+2
InvestmentRE-C05-i13 – Scientific Research UnitsRE-C05-i13 – Scientific Research Units
CallNotice 01/C05-i13/2025Notice 02/C05-i13/2025
ReferenceUID/PRR/00729/2025 doi.org/10.54499/UID/PRR/00729/2025UID/PRR2/00729/2025 doi.org/10.54499/UID/PRR2/00729/2025
Execution period01-01-2025 to 30-06-202601-01-2025 to 30-06-2026
InstitutionsNOVA FCT (lead) and FBAULNOVA FCT
CoordinatorMárcia Gomes VilariguesMárcia Gomes Vilarigues
Amount allocated€359,697.95 (NOVA FCT €269,773.46; FBAUL €89,924.49)€80,866.92
Amount executed€359,653.76 (99.99%): NOVA FCT €269,771.76; FBAUL €89,882.00€80,452.37 (99.49%)
ObjectiveStrengthen VICARTE’s equipment for research, experimentation and artistic creation in glass and ceramicsAdditional equipment: 3D digital microscopy, spectroscopy and high-temperature thermal analysis

Equipment at NOVA FCT (Caparica campus)

Microscopy and imaging

  • Hirox HRX-01 3D digital microscope: non-invasive imaging, 2D/3D measurement and 3D surface reconstruction of glass, enamels, ceramics and tiles; motorised 20×–160× lens, 360° rotary head, 3D and E-tiling software. EQUIPAR+2
  • AvaLight-DH-S deuterium-halogen light source, optical fibres and WS-2 white reference: stable broadband illumination for calibrated measurements from UV to near-infrared; extends the 3D microscope. EQUIPAR+2
  • Oxford Instruments EDS detector with AZtecLive: real-time elemental analysis and mapping in the scanning electron microscope. PRR1
  • Hitachi high-voltage power supply for the scanning electron microscope: keeps the SEM operational for research and analytical services. PRR1
  • Nikon SMZ745T stereomicroscope with DS-Fi3 camera and mobile stand: observation and photographic documentation of objects and samples. PRR1
  • Four Nikon SMZ445 stereomicroscopes: observation of surfaces, deterioration and biodeterioration. PRR1

Materials analysis

  • Netzsch DIL 402 dilatometer: thermal expansion, glass transition and softening point of glass, glazes and ceramic bodies. PRR1
  • Silicon carbide furnace for the dilatometer: controlled heating up to about 1550 °C. EQUIPAR+2
  • Digital polariscope PD-330: internal stress and defects in glass. PRR1
  • Abbe refractometer AR4 (A. Krüss): refractive index of glass. PRR1
  • AvaSphere-50-REFL integrating sphere and AvaLight-HAL-S-Mini2 halogen source: reflectance and transmittance of glass and glazes, independent of the angle of incidence. PRR1
  • X-ray source coupled to a spectrometer: elemental analysis by X-rays. PRR1
  • Autoclave: sterile culture media for studying the biodeterioration of glass and ceramics. PRR1
  • Glass and ceramics workshop
  • Glass kilns, FV model (three units): melting, forming and heat treatment of glass. PRR1
  • 5 L chamber furnace: programmable heat treatment of small samples with lower energy use. PRR1
  • Vacuum extruder and slab roller: processing and recycling raw clays; slabs for glaze tests and artwork. PRR1
  • Glass cutting lathe: cutting and engraving curved glass surfaces. PRR1
  • Electric polisher: polishing glass samples and artworks. PRR1
  • Precision trim saw: controlled cutting of small samples. PRR1

Computing and communication

  • Three Dell Pro Max 16 laptops: fieldwork and mobility with laboratory-level performance. PRR1
  • HP EliteDesk computer: processing X-ray tomography images and data. PRR1
  • Epson EB-L992F projector: seminars, workshops and hybrid meetings. PRR1

Equipment at FBAUL (Lisbon)

  • Robotic arm «Cérebro», with Lenovo LOQ Tower control computer and Samsung ViewFinity S6 24″ monitor: robotic fabrication in ceramics. PRR1
  • Fritsch Pulverisette 13 disc mill: crushing glass for recycling. PRR1
  • Ceramic kiln for 1300 °C (20 kW). PRR1
  • E/6-E kiln for 1300 °C. PRR1
  • MV15 glass kiln (90 × 60 × 50 cm). PRR1

Access

The equipment is shared by researchers of NOVA FCT and FBAUL and is available to museums, heritage bodies, other laboratories and companies by appointment, through scientific collaboration or as a service.

Contact: vicarte.secretariado@fct.unl.pt

Funding notice (with the logo bar)

Funded by the European Union – NextGenerationEU, through the Recovery and Resilience Plan, projects UID/PRR/00729/2025 (doi.org/10.54499/UID/PRR/00729/2025) and UID/PRR2/00729/2025 (doi.org/10.54499/UID/PRR2/00729/2025).

VICARTE is supported by FCT – Fundação para a Ciência e a Tecnologia, I.P., through national funds, project UID/00729/2025 (doi.org/10.54499/UID/00729/2025).